Introduction to Tantalum Cartbide TaC Powder
Tantalum carbide
Oder
TaC
It’s a cubic powder made of metallic and brown cubic crystals. This belongs to sodium chloride cubic cristal system. It has a density of 11.3g/cm3. It is water insoluble. It has a strong resistance to oxygen and is easily meltable with potassiumpyrosulfate. Superconductivity can be demonstrated through its conductivity. It can resist 30O at ambient temperature.
Tantalum carbide
This is useful for making and repairing powder metalurgical tools. This can be used to make watches decorations from sintered-body tantalum caride.
| Tantalum Carbide TaC Powder Properties | |
| Additional Names | TaC powder, tantalum IV carbide |
| No. | 12070-06-3 |
| Formula compound | TaC |
| Molecular Weight | 192.96 |
| Appearance | All powders, deep and brown. |
| Melting Point | 3850degC |
| Boiling Point | 4780-5470 degC |
| Density | 14.3-14.7g/cm3 |
| Solubility in water | It’s impossible to solve. |
| Mass exact | 192.948 |
Tantalum Carbide TaC Powder Cas 12070-06-3
Tantalum Tantalum Carbide TaC With Powder
1. Tantalum pentoxide and solid carbon ball mills can be used to make TaC powder. The mixture should be reduced to 1700. After that, carburize the mixture in an unoxidizing atmosphere (not a vacuum or argon).
2. In order to produce nano tantalumcaride-powder, the liquid precursor had to be heated in an oxygen-free atmosphere. Anhydrousethanol was added to a small container with 0.50gTaCL5. Once it had been filled with 5mL, the anhydrousethanol was added to a small glass container containing 0.50gTaCL5. The temperature was raised to 55 degrees Celsius. After that, the heat at 40kHz was applied for 20 minutes. It was next turned on with an ultrasonic cleanser, and then placed in an80-watt cleaner. In between 5-10 min, ultrasonic oscillation was complete. Next, 0.10g was added to the nano-activated carbohydrates. After approximately 15 minutes of oscillation, it was stopped. Transfer it to a crucible. The inner walls of the crucible should be thoroughly coated. A fan can help dry the sample. You can heat the sample with a heat press furnace. Use a sponge or brush to scrub the product after you have finished.
3. By heating air, you can turn tantalum pentoxide into heat. With potassium pyrosulfate, fusion can be achieved. In an inert atmosphere heated at 1900 degrees Celsius, you can mix tantalum with tantalumcarbon.
4. A reaction gas can be created by using methane and Tantalum pentoxide. Argon serves as the carrier. The silicon carbide resistance to external radiation heating and carbonization is essential.
Tantalum Carbide TaC Powder
This additive is used in both military and industrial settings. Cemented carbidide, for example, is an example. Cemented carbidide is used in order to inhibit the formation of particles of tungsten carbonide. It also helps cemented carbide reach higher temperatures.
You can use a coating for cutting tools to improve the wear resistance and chemical resistance.
The military can use this to protect jet engine blades. You can increase the life span of your jet engine blades and lower their ablative resistance.
You can use it as an electrode material because of its conductivity. It is possible to cut an electric cable into intricate shapes.
In the second phase, particle-reinforced matrix composites are suitable for use in aerospace, metalurgy, and other fields like mining, electric power, or waterpower.
Major Supplier of Tantalum Carbide TaC dust
Nano Technology Co. Ltd., a supplier of quality chemicals is internationally recognized.
You can get high-quality Tantalum carbide TaC Powder. Send us an inquiry (brad@ihpa.net)
1. Tantalum pentoxide and solid carbon ball mills can be used to make TaC powder. The mixture should be reduced to 1700. After that, carburize the mixture in an unoxidizing atmosphere (not a vacuum or argon).
2. In order to produce nano tantalumcaride-powder, the liquid precursor had to be heated in an oxygen-free atmosphere. Anhydrousethanol was added to a small container with 0.50gTaCL5. Once it had been filled with 5mL, the anhydrousethanol was added to a small glass container containing 0.50gTaCL5. The temperature was raised to 55 degrees Celsius. After that, the heat at 40kHz was applied for 20 minutes. It was next turned on with an ultrasonic cleanser, and then placed in an80-watt cleaner. In between 5-10 min, ultrasonic oscillation was complete. Next, 0.10g was added to the nano-activated carbohydrates. After approximately 15 minutes of oscillation, it was stopped. Transfer it to a crucible. The inner walls of the crucible should be thoroughly coated. A fan can help dry the sample. You can heat the sample with a heat press furnace. Use a sponge or brush to scrub the product after you have finished.
3. By heating air, you can turn tantalum pentoxide into heat. With potassium pyrosulfate, fusion can be achieved. In an inert atmosphere heated at 1900 degrees Celsius, you can mix tantalum with tantalumcarbon.
4. A reaction gas can be created by using methane and Tantalum pentoxide. Argon serves as the carrier. The silicon carbide resistance to external radiation heating and carbonization is essential.
Tantalum Carbide TaC Powder
This additive is used in both military and industrial settings. Cemented carbidide, for example, is an example. Cemented carbidide is used in order to inhibit the formation of particles of tungsten carbonide. It also helps cemented carbide reach higher temperatures.
You can use a coating for cutting tools to improve the wear resistance and chemical resistance.
The military can use this to protect jet engine blades. You can increase the life span of your jet engine blades and lower their ablative resistance.
You can use it as an electrode material because of its conductivity. It is possible to cut an electric cable into intricate shapes.
In the second phase, particle-reinforced matrix composites are suitable for use in aerospace, metalurgy, and other fields like mining, electric power, or waterpower.
Major Supplier of Tantalum Carbide TaC dust
Nano Technology Co. Ltd., a supplier of quality chemicals is internationally recognized.
You can get high-quality Tantalum carbide TaC Powder. Send us an inquiry (brad@ihpa.net)
Talk to us
Ask us
Inquiry us