What does zinc stearate-emulsion mean?
Zinc Stearate is an organic material with a chemical composition of C36H70O4Zn. It comes as a powder in white and is not soluble in water. This is primarily used to lubricate and act as a release agent for phenolic, styrene and amino resins. Additionally, this product can be used as an activator for vulcanization and softener in rubber.
Zinc stearate aqueous emulsion is known as Zing Stearate Emulsion . This agent can be used in a variety of ways, including as a release, color retention, lubricant or release agent.
Z Inc Stearate Emulsion Characteristics
Water insoluble, but soluble in hot organic solvents, such as toluene or benzene. Decomposes to stearic acid when it comes into contact with acid.
Z Inc stearate Vorbereitung
Two methods for producing zinc stearate are available: The water method or the melting method.
Zinc stearate made by water is generally acidic and melting is alkaline. This is sometimes called the “wet” method. To control the water’s temperature and pressure, a catalyst and then a metallic hydroxide are added. To make stearin, the metalions are first replaced by catalysts. In order to generate metal salts, acids are used. Post-processing is performed on the catalyst and it can be recycled. After being centrifuged and dried, the stearate can be ground into a product that is 200 to 600 mesh. This meets all industry standards. Because water production is often characterized by a slightly higher level of stearic Acid, the end product will appear acidic.
Also known as the “dry method”, the melting process is when the metal oxide (directly method zinc oxide), is added to the moltenstearic acids (subject to the presence of catalyst). Control the temperature, pressure, and stirring speed in order to get stearate by reaction. Because the catalyst is present in most reactions, these products can be completely reacted. The metal oxides produced by the dry process are somewhat excessive so it’s alkaline.
Emulsion of zinc stearate
Zinc Stearate can also be used to heat stabilizers, grease, accelerators and thickeners. You can use it as a heat stabiliser for PVC resin. This product can be used for general industrial transparent products. It can also used together with a calcium soap to create non-toxic products. Although this product is most commonly used in soft products it has been increasingly used in hard transparent products in recent years such as water pipes and mineral water bottles. The product is very lubricious and may be used. This product is able to reduce the appearance of fouling and it can also be used in lubricants, release agents, flattening agents for paints and additives for paints.
Zinc Stearate Emulsion is versatile in many applications including plastic, rubber, coatings. Paints. Thermal paper. Cosmetics.
Rubber industry: active agents, release agent, and release agent
Industry plastic: Internal release agent
Coating industry: color retention agent, filler, etc.
Paint industry: grinding aids
Lubricants industry
Cie-China (aka. Luoyang Tongrun Nano Technology Co. Ltd. (aka. We produce Zinc Stearate Emulsions with high purity, small particle sizes and low impurities. Thank you Please contact us if necessary.
Zinc stearate aqueous emulsion is known as Zing Stearate Emulsion . This agent can be used in a variety of ways, including as a release, color retention, lubricant or release agent.
Z Inc Stearate Emulsion Characteristics
Water insoluble, but soluble in hot organic solvents, such as toluene or benzene. Decomposes to stearic acid when it comes into contact with acid.
Z Inc stearate Vorbereitung
Two methods for producing zinc stearate are available: The water method or the melting method.
Zinc stearate made by water is generally acidic and melting is alkaline. This is sometimes called the “wet” method. To control the water’s temperature and pressure, a catalyst and then a metallic hydroxide are added. To make stearin, the metalions are first replaced by catalysts. In order to generate metal salts, acids are used. Post-processing is performed on the catalyst and it can be recycled. After being centrifuged and dried, the stearate can be ground into a product that is 200 to 600 mesh. This meets all industry standards. Because water production is often characterized by a slightly higher level of stearic Acid, the end product will appear acidic.
Also known as the “dry method”, the melting process is when the metal oxide (directly method zinc oxide), is added to the moltenstearic acids (subject to the presence of catalyst). Control the temperature, pressure, and stirring speed in order to get stearate by reaction. Because the catalyst is present in most reactions, these products can be completely reacted. The metal oxides produced by the dry process are somewhat excessive so it’s alkaline.
Emulsion of zinc stearate
Zinc Stearate can also be used to heat stabilizers, grease, accelerators and thickeners. You can use it as a heat stabiliser for PVC resin. This product can be used for general industrial transparent products. It can also used together with a calcium soap to create non-toxic products. Although this product is most commonly used in soft products it has been increasingly used in hard transparent products in recent years such as water pipes and mineral water bottles. The product is very lubricious and may be used. This product is able to reduce the appearance of fouling and it can also be used in lubricants, release agents, flattening agents for paints and additives for paints.
Zinc Stearate Emulsion is versatile in many applications including plastic, rubber, coatings. Paints. Thermal paper. Cosmetics.
Rubber industry: active agents, release agent, and release agent
Industry plastic: Internal release agent
Coating industry: color retention agent, filler, etc.
Paint industry: grinding aids
Lubricants industry
Cie-China (aka. Luoyang Tongrun Nano Technology Co. Ltd. (aka. We produce Zinc Stearate Emulsions with high purity, small particle sizes and low impurities. Thank you Please contact us if necessary.
Inquiry us