Tungsten dioxid, a common mixture of tungsten and sulf. It contains one tungsten atom and two sulfur molecules. Tungsten Disulfide Chemical Formula Is WS2. It exhibits excellent thermodynamic and optoelectronic characteristics. Tungsten disulfide Properties
Low friction
The dynamic coefficient of tungsten oxide (WS2) is 0.30. Although the static coefficient is between $0.70 and $0.90, it’s close. These results are affected by surface finish, pressure and hardness. Except for extreme overload, there is little to no variation in the wear results from real-life, extensive and continuous wear.
Chemistry stability
Tungsten Diulfide (WS2) does not have a toxic, inert or corrosive nature. It can be applied to any metal substrate. It is not affected by most solvents. It can also cause erosion by hydrofluoric, sulfuric, fluorine, and hot caustic solution. WS2 can resist corrosion well, but it cannot prevent corrosion from materials that are inherently weak.
Compatibility
You can use the WS2 to produce petrochemical and synthetic oil, as well as lubricants. It has an affinity for lubricants. The oil strives to preserve the fluid power.
Operating temperatures
Temperatures at which WS2 can operate are between -460 F and 1120 F in regular air, 2400F in vacuum. It has a lower oxidation threshold of 825°F than other lubricants. You also get very poor exhaust characteristics. Due to its heat resistance, tungsten fluoride can be used for bolt fitting into exhaust system shafts on any car make or model.
What’s tungsten disulfide for?
Petrochemical catalyst:
Aside from its excellent cracking abilities, high catalytic activities, extended service life and outstanding breaking ability, WS2 can be used to catalysts for hydrogenation, desulfurization polymerization and reforming.
An oil-based lubricant
It has a friction coefficient of 0.01-0.03 and a compressive strength up to 2100MPa. The lubricant offers many advantages including high lubrication temperatures, long life spans, low friction coefficient, good acid and alkali resistance, as well as excellent corrosion resistance. This product is often used in the transportation of high-temperature and chemical active media.
As energy storage electrode material:
WS2 stands for a type layered material interconnected with WMurS or van der Waals forces. It is medium in distance. The material has good thermal stability, excellent storage performance and fast electron transfer rates. These characteristics can increase the energy density, as well as the structural stability, of the electrode materials.
Chip transistors
For more data storage and processing, you can use low-dimensional semiconductor material made from transitional metals such WS2 to create semiconductor devices.
An additive that adds high performance to lubricating fluids.
It was shown that adding appropriate amounts of WS2 to the lubricating liquid can dramatically improve its lubrication performance. This will decrease friction coefficient by 20%-50% and increase oil film strength. Also, it reduces the oil/water ratio by 30-40%. Nano-MoS2 does not have the same lubrication properties as WS2 nanoparticles.
Tungsten disulfide Price
The demand for and supply of the product or service, as well industry trends and market conditions can affect price. Economic activity. Unexpected events
For the latest price send an email to us. (brad@ihpa.net)
Tungsten disulfide Supplier
Advanced Material Nano Technology Co. Ltd., is a trustworthy Tungsten sulfur producer as well as Tungsten sulfur provider. With more than 12 years of experience, they are highly qualified. Our products can be shipped worldwide.
Email us for high-quality Tungsten dulfide powder. (brad@ihpa.net)
Low friction
The dynamic coefficient of tungsten oxide (WS2) is 0.30. Although the static coefficient is between $0.70 and $0.90, it’s close. These results are affected by surface finish, pressure and hardness. Except for extreme overload, there is little to no variation in the wear results from real-life, extensive and continuous wear.
Chemistry stability
Tungsten Diulfide (WS2) does not have a toxic, inert or corrosive nature. It can be applied to any metal substrate. It is not affected by most solvents. It can also cause erosion by hydrofluoric, sulfuric, fluorine, and hot caustic solution. WS2 can resist corrosion well, but it cannot prevent corrosion from materials that are inherently weak.
Compatibility
You can use the WS2 to produce petrochemical and synthetic oil, as well as lubricants. It has an affinity for lubricants. The oil strives to preserve the fluid power.
Operating temperatures
Temperatures at which WS2 can operate are between -460 F and 1120 F in regular air, 2400F in vacuum. It has a lower oxidation threshold of 825°F than other lubricants. You also get very poor exhaust characteristics. Due to its heat resistance, tungsten fluoride can be used for bolt fitting into exhaust system shafts on any car make or model.
What’s tungsten disulfide for?
Petrochemical catalyst:
Aside from its excellent cracking abilities, high catalytic activities, extended service life and outstanding breaking ability, WS2 can be used to catalysts for hydrogenation, desulfurization polymerization and reforming.
An oil-based lubricant
It has a friction coefficient of 0.01-0.03 and a compressive strength up to 2100MPa. The lubricant offers many advantages including high lubrication temperatures, long life spans, low friction coefficient, good acid and alkali resistance, as well as excellent corrosion resistance. This product is often used in the transportation of high-temperature and chemical active media.
As energy storage electrode material:
WS2 stands for a type layered material interconnected with WMurS or van der Waals forces. It is medium in distance. The material has good thermal stability, excellent storage performance and fast electron transfer rates. These characteristics can increase the energy density, as well as the structural stability, of the electrode materials.
Chip transistors
For more data storage and processing, you can use low-dimensional semiconductor material made from transitional metals such WS2 to create semiconductor devices.
An additive that adds high performance to lubricating fluids.
It was shown that adding appropriate amounts of WS2 to the lubricating liquid can dramatically improve its lubrication performance. This will decrease friction coefficient by 20%-50% and increase oil film strength. Also, it reduces the oil/water ratio by 30-40%. Nano-MoS2 does not have the same lubrication properties as WS2 nanoparticles.
Tungsten disulfide Price
The demand for and supply of the product or service, as well industry trends and market conditions can affect price. Economic activity. Unexpected events
For the latest price send an email to us. (brad@ihpa.net)
Tungsten disulfide Supplier
Advanced Material Nano Technology Co. Ltd., is a trustworthy Tungsten sulfur producer as well as Tungsten sulfur provider. With more than 12 years of experience, they are highly qualified. Our products can be shipped worldwide.
Email us for high-quality Tungsten dulfide powder. (brad@ihpa.net)
Ask us
Inquiry us